If you have a fire or water emergency, please call us now at (478) 452-8000

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Flood Damage From Appliances in Your Home

1/2/2018 (Permalink)

Steps to removing water and drying your home after a failed appliance causes a flood

Most flooding problems in homes come from the inside, rather than from a rising creek or river. In many of these cases, the problem results from a failed dishwasher or a split intake hose for a clothes washer.

Appliance flood damage in a home sounds simple, but the truth is very different. A failure of either of these machines can drop over five gallons of water on the floor every hour. SERVPRO knows that if this happens in the morning after everyone leaves for work, that means an entire, three-bedroom room can be under an inch of water before the homeowner or renter walks in to find a disaster.

The only advantage to dealing with flooding from such an inside source is that it is clean water. There is no contamination to have to worry about, so there is no need for special protective gear and since cleaning the surfaces is not required, the overall time necessary for the job is far less as well.

The first step we take is to stop the flow of water. If a resident has not turned off the water main, we do it immediately after arriving on the property.

Next, we get to work removing standing water. For any amount over an inch, we start with commercial grade water pumps. These machines can empty out an average home in an afternoon, allowing us to bring in more equipment and inspect for damage to floors, carpets, and walls. If the power is out, we bring in our generators for uninterrupted electrical support.

If there is no permanent damage, we draw out remaining water trapped on carpets and floors. Technicians use extraction wands which are designed to bring out the water without harming wood surfaces or damaging the nap of the rug. This part of the job is more time-consuming and can take up to a full day or more.

With the water removed, we now lower the moisture levels in the surrounding air. To do so, we use dehumidifiers to draw moisture out of the air. Each device can remove over twenty gallons every day depending on the humidity and size of the dehumidifier we use. We perform this task to prevent the possibility of rot or mold growth in the walls and floors.

Drying out your home is not an easy process, but the right restoration company can do it quickly and safely. The experts at SERVPRO of Baldwin and Monroe has decades of experience helping our neighbors put their homes back together after a flood. If you need our help, call today!

Other News

View Recent Posts